I am engaged in the restoration of cast iron, steel, acrylic bathtubs and shower trays in Kropyvnytskyi, all areas of the city. We also carry out restoration of an old bath in the suburbs: Oleksandria, Znamyanka, Novgorodka, Kompanіїvka, Bobrynets, Oleksandrivka, Subottsі, Nova Prague, Novomirgorod… All methods of bath reconstruction: bath enamelling, filling bath, acrylic “bath in bath” insert.
Not a company, I have been working as a private master with a partner since 2012. We work for the result, we do it wisely and conscientiously! As you would do for yourself, for your relatives, or close friends. If you just need to do well, once and forget about the problems with the bathroom – then contact us! Only high-quality materials and top tools are available to perform the most complex and painstaking tasks.
High quality and expensive materials
Fair and reasonable price
Over 10 years experience
The most beautiful and reliable way to restore a bath at home (price \ quality) is the restoration of a bath with liquid acrylic in Kropyvnytskyi (a bulk bath). The cost of restoring bathtubs with acrylic is a little more expensive than regular painting using the method of enameling a bathtub, but it is justified. Unlike paint or bathtub painting, “bulk acrylic” has practically no smell, dries quickly – usually 24 hours, a large amount of enamel is applied (2.5 kg.), Respectively, the thickness of the new coating reaches 8 mm, the application method is by pouring, due to this The result is a smooth and even finish with a flawless gloss.
Restoration of bathtubs Kropyvnytskyi price without additional costs and extra charges:
Bulk bath 2600 UAH
*Found cheaper? Be careful sometimes under the guise of a “bulk bath” they do the usual painting!
The price is valid!
We do not do this: the site says a bulk bath from 2000 UAH. When you call, it turns out 2500 UAH. and upon arrival of the master and at all 3000 UAH. after all, the size of the bath turned out to be larger, the bath is very dirty, the siphon must be removed, and so on.
*in the process of bath restoration, if possible, we remove the siphon (free of charge). It will be possible to install it back or replace it with a new one only after the material has solidified (after 24 hours) – the price is not included!
P.S. Beware of masters and one-day firms, alterations are always more expensive and take more time. (removal of paint, low-quality coating +400 UAH)
Restoration of a cast-iron bath in Kropyvnytskyi, as well as repair of an acrylic or iron bath, takes place at home. All work is done carefully, the tile or something else is not damaged and takes about 3-4 hours. The new coating dries in a day, provided that the temperature in the bathroom is not lower than 24 degrees (if it is lower, it is better to wait 2 days).
First, I prepare the surface of the bath: I clean the bath with a diamond disc (cleans off any dirt, rust, plaque, and most importantly makes the surface rough and matte) + special treatment. chem. composition, everything is washed off with a large stream of water, degreasing, drying and heating the bath with an industrial hair dryer, which as a result will ensure reliable adhesion of the new enamel to the bath – the new coating does not peel off at all! Then, if possible, I remove the siphon and fill it with liquid acrylic – the bath will be snow-white, smooth and shiny!
The bath is cleaned “wet” – there will be no dust fog. The new enamel does not have a toxic smell – you can stay in the apartment. If you are worried about the safety of the tile – do not worry, the tile is pasted over with masking tape.
Question: How to prepare a bathtub for restoration?
Answer: During the reconstruction of the bath, the bathroom must be warm. The best temperature is 22 – 24 degrees. It is also important that water does not leak from the faucet located above the bathtub. Make sure you have access to the siphon (drain / overflow), after cleaning the bath, I remove it if possible. You can order the restoration of bath enamel with us 1-2 days before the order is completed. Before arrival, remove personal hygiene products from the bathroom, if possible, prepare clean rags (rags).
Question: When is the best time to refurbish a bath, before the bathroom is refurbished, or after?
Answer: Only after the renovation of the bathroom! It is right to paint the walls at the end of the repair, and not at the beginning – so it is here. In order to clean the bath according to the technology, it is necessary to have water from the tap and drain the water from the bath, an installed siphon. After applying the new enamel, the bath should dry in a warm, clean and dry area. It is important not to stick plastic plinth on the sides of the bathroom, silicone, grout – it is better to connect the bathtub and tiles after restoration!
Question: What liquid acrylic enamel do you use in your work: premium, vip or regular?
Answer: Only high-quality time-tested liquid acrylic enamel! To date, enamel for the restoration of bathtubs liquid acrylic is supplied only by European manufacturers – all of them are vip-premium quality! Only ordinary bath paint can be ordinary and it is easy to distinguish: the volume of such paint is up to 1 kg. (liquid acrylic 2.5 kg.), has a characteristic smell, does not lay down evenly. Please note, if you are offered to restore a bathtub with liquid acrylic, but at a higher price supposedly premium, impact-resistant material with the addition of gold nano particles, this marketing ploy is only aimed at increasing earnings!
Question: How long will a new “spill bath” coating last?
Answer: Even the highest quality liquid acrylic enamel will not last you even a year if applied to a poorly prepared surface. We pay special attention to this – the new coating does not peel off at all! As for the appearance, nothing lasts forever, like any thing, including a new bath from water, detergents and operation, it loses its original appearance over time, for someone faster for someone longer, on average it is 7-10 years.
Question: How to wash the bath after the restoration of “bath care”?
Answer: Caring for a renovated bathroom is no different than caring for a new bathroom. You can use any bath detergent, as long as you read the recommendations and follow them. I recommend using a detergent for acrylic bathtubs – it does not contain aggressive acids that corrode the enamel over time.
*All reviews are verified for authenticity. Review texts are not edited and are published “as is”
Job well done. Thank you very much. I recommend!
Feedback on the assignment: Restoring the enamel of a bathtub
We decided to update the cast iron bath. Phoned, the master clarified all the details. Even before the task was completed, it became clear that the person was a professional in his field. Everything is clear and precise. And, most importantly, the result is just a new bath! Thank you!
Feedback on the assignment: Restoration of a cast-iron bathtub
Feedback on the assignment: Acrylic bath liner price
He did the job very carefully and professionally, gave the necessary advice and instructions for the further care of the bathroom. Thank you!
Feedback on the assignment: Restoration of a bathtub with liquid acrylic
And he was late for an hour, he referred to the work of transport. They did the “enamelling of the bath”. I can’t say that I’m particularly pleased. The enamel smelled too bad, I had to air the apartment all day. And it looks like the bath is whiter.
Feedback on the assignment: Bathtub painting
I don’t know how much better or worse other bath repair companies do, but I liked the organization of the work itself. No one “divorces” for money – they immediately say that it is cheaper, but worse, that it is better, but more expensive.
Feedback on the assignment: Restoration of an acrylic bathtub
Excellent master. Great job. Thank you!
Feedback on the assignment: Enameling of bathtubs
I ordered the restoration here because the very specifics of cleaning the bath inspired confidence. This is already the second restoration of the bathtub by the pouring method (before that I ordered from others, I don’t remember the site). The first time they sanded badly, I took off the acrylic a year later with my bare hands !!! Some of the walls were smooth. This time they sanded to the conscience, the walls were rough … I’ll see how long this bath will last …
Feedback on the assignment: Covering a bathtub with acrylic
An honest and accurate master can be seen that he is trying, but in my case there was a slight influx.
Feedback on the assignment: Enameling a bathtub
© 2020 J-Vanna. All rights reserved.
My details: m. Kropyvnytskyi, 25000, st. Gogol 77/25
+38 (095) 218-44-89